MICHELIN Solar Tyre Pressure Monitoring System TPMS

Why you’ll love it ✨

📊 Real-time 4-wheel display — pressure & temperature at a glance
🔋 Auto on/off — wakes when moving, sleeps when parked
🌞 Bright screen — clear in daylight, compact to place anywhere
🔌 Dual power — USB power + solar rechargeable battery
📡 Stable signal — quick, reliable updates from each sensor
🛡️ Quality sensors — sealed, dust/splash-resistant
⏱️ Long life — Lifespan more than 6 years
⚙️ Set & forget — Bar/kPa + custom alarm limits

What’s in the box 📦
1× TPMS display unit
4× MICHELIN sensors
1× Quick start guide & warranty

Compatibility ✅
Fits most cars/MPVs/SUVs with standard valve stems.

Safety & warranty 🛡️
Official MICHELIN licensed accessory
QC checked + local seller warranty (see store policy)

FAQs ❓
Will it fit my car?
✔️ Yes for most standard valves. Message us if you have special wheels/valves.

Why MICHELIN TPMS 🏁
Brand you trust ✅
Alerts you can see & hear 🔔
Stable signal & fast refresh ⚡
See your tyres in real time — prevent flats, save fuel, protect your wheels. 💙

📈 Pressure range: covers typical cars & SUVs (set per vehicle placard)

🧮 Units: Bar / kPa (selectable)

🌡️ Temperature display + alarm

🔋 Power: USB + solar rechargeable HD colour display, sensor battery more than 6 years life span.

🤖 Auto: wake/sleep/scan

💡 Tip: Find your correct pressure on the driver-door placard or owner’s manual. Set high/low alarms to match.

Instruction to Install Sensor
1. Remove the tyre from the rim.
2. Remove the current valve stem.
3. Clean the valve hole.
4. Install the TPMS sensor.
5. Tighten the nut with a M11 socket to 5 Nm.
6. Inspect installation (see precautions).
7. Balance the wheel.
8. Reinstall the tyre.

Instruction to Install Display Unit
Long-press the “–” key for 3 seconds to power on/off. Fix the unit with the anti-slip pad on the dashboard where it's easy to view and gets sunlight. Turn on the display before sensor install, as each sensor is installed, its wheel data will appear. All parameters are factory-preset; users typically don't need to change settings.

① After power-on, if the car stays still for >180 s the display sleeps to save power, and auto-wakes on movement/vibration.
② Anti-slip pad is washable and reusable (rinse and air-dry to restore stickiness).